Air Intake Filter Screens

Easy to fit, easy to clean

RABScreen air intake filter screen - drill and fix

Using BHA or BHC (U) media the RABScreen standard fitment air intake screen is edged with a 32mm vinyl border. This border is punched and fitted with 9.5mm stainless steel grommets to create an easy to fit external filter screen which is great for cooling coil protection. The fixing methods will vary to suit your application and can use a combination of different fittings if required (see fixings ). We even pattern cut to avoid stanchions.Watch the PreVent video "How to Measure and Install" . Just click the link.



 

Standard Fixings

  • MagnaMount fittings
  • Drop tab fittings
  • Jack nut fittings
  • Bungee cords
  • Velcro®
  • Magnetic strip
  • Aluminium frame
  • Stainless steel frame
  • Galvanised frame


 

RABScreen air intake filter screen - magnetic strip and drop tab fittings

Again the standard BHA or BHC media is used but in this instance a galvanised or stainless steel framework is formed around the edges of the media. The framework of the RABScreen air intake screen is then fitted with a magnetic strip which will secure to any steel surface. This type is great for smaller openings and for protecting the air intakes of display refrigeration equipment. And with the new MagnaMount™drop tab fixing you can now use our flexible screens as well which are great for cooling coil protection.

RABScreen air intake screen fitting - rigid frames

Typically used to protect chiller coils where the it difficult to gain safe access to the coils. A lightweight profile is used to construct a "picture frame" to match the coil face. The RABScreen is then secured to the frame with self-tapping screws. A galvanised profile creates a filter frame for the RABScreen air intake screens to slide or drop in. Great coil protection with easy to access filter media.Many other frame options available. Great for cooling coil protection



 


 

RABScreen air intake screen fitting -wrap around technique

Wrap around RABScreen air intake screens are the most simple to specify and install. They are used to protect standalone condensers where you have one, two or three coil faces. Great for cooling coil protection. Once we have the overall length and height of the coil faces we will manufacture a filter screen which is then wrapped around and secured with free issue Permatron bungee cords. Easy to fit and easy to remove these filters are an economic solution to AC condenser protection. Now available with the unique MagnaMount™drop tab fixing as an option. Read more

RABScreenair intake filters can be used wherever you have air movement and, because they are weather resistant, are suitable for both internal and external applications.

Just call or email to see how we can save start saving you money.

Contacts

RABScreen
RAB Specialist Engineers Limited
29 St. James’ Road
Wick, Cowbridge
CF71 7QW

info@rabscreen.com
phone 01656 330 730

© Copyright 2024 RAB Specialist Engineers LimitedWeb Design By Toolkit Websites